Home → Frankston South → Air Conditioning Installation
Air Conditioning Installation in Frankston South from Impulse Electrical Contractors, based nearby in Dromana and servicing the wider Mornington Peninsula. Around the elevated bayside streets, the local shops and the coastal outlook over the bay, brick veneer family homes, elevated bayside properties, architect-designed rebuilds and renovated extensions need electrical work that is safe, tidy and suited to local conditions.
Call 0418 383 232Air conditioning in Frankston South, on our side of the job, is the dedicated circuit, the isolator and the switchboard check. Original brick veneer homes often have no spare way for a split system, so the electrical work includes the board. A renovation that adds a unit in a new living room has to count that circuit with the rest of the new load. An outdoor unit on an elevated bayside house also needs an isolator that can live in bay air. Impulse Electrical does that electrical work from our Dromana base, alongside your refrigeration installer.
Reverse-cycle air conditioning needs a safe, correctly sized electrical supply before it can cool and heat reliably. Impulse Electrical completes the electrical side of split-system and air conditioning installations, including dedicated circuits, isolators, switchboard checks and neat cabling. We work with refrigeration installers or your chosen technician to make sure the unit is powered safely and compliantly. In Frankston South, peninsula homes face hot northerlies, cool winter mornings and strong afternoon sun, so correct electrical sizing matters for comfort and reliability. Impulse Electrical is fully licensed — A Grade A53308 and REC 25266 — with $25M public liability and a Certificate of Electrical Safety supplied on every job.
We do not guess the circuit from the brochure. We look at the board, the route to the outdoor unit and the isolator position, then we install the supply the unit needs. You leave with a labelled circuit, a tested isolator and a COES. Call 0418 383 232.
A split system needs its own circuit, sized for the unit the refrigeration installer is fitting, with an isolator at the outdoor unit and a cable run that is fixed and protected. On an original board that circuit often does not fit until the enclosure is upgraded. On a renovation we check the unit alongside the new kitchen and the extension, so the board is sized once. Near the bay we pay attention to the isolator and the outdoor fixings. We do not connect a new unit to a power point.
The cooling load is the installer's calculation. Our part is whether the Frankston South board can feed it. In the original brick veneer homes it often cannot, and saying so before the unit is on the wall avoids a second visit. A unit in a renovated living room is the same electrical question plus the rest of the new circuits. We do not leave the fuse board in place because the indoor unit is new.
Related reading: Air conditioning electrical work across the Peninsula · Air conditioning electrical guide · Electrician Frankston South
Also serving: Frankston,Mount Eliza,Karingal,Langwarrin
The electrical supply. We run the dedicated circuit, fit the isolator and check the switchboard. The refrigeration installer or your chosen technician hangs and commissions the unit. We coordinate so the circuit is ready when they need it.
Often, after the board is upgraded or a spare way is confirmed. Many original brick veneer boards have no room for another circuit. We look before the unit is on the wall, and we say when the board is part of the job.
Yes. The split system should be counted with the new kitchen and extension so the board has a way for it. We plan that with you or your builder before the ceilings are closed.
The circuit is the same idea. The outdoor isolator and fixings need to suit salt air if the unit sits on an exposed bayside wall. An ordinary inland isolator left on that wall does not stay reliable.
