Home → Somerville → Power Point Installation
Power Point Installation in Somerville from Impulse Electrical Contractors, based nearby in Dromana and servicing the wider Mornington Peninsula. Around the village shops, local schools and the surrounding hobby farm belt, suburban family homes, older established houses, hobby farms and larger rural blocks need electrical work that is safe, tidy and suited to local conditions.
Call 0418 383 232Power points in Somerville fail in two places. Older family homes were wired with too few outlets, so double adaptors and leads sit on circuits that were never meant for today's chargers and appliances. Hobby farms need outlets in the shed, sometimes a dedicated circuit for tools or a bore pump, and weatherproof points where the work is outside. Impulse Electrical adds both, from our Dromana base.
Extra power points make homes safer and more practical by reducing the need for double adaptors and extension leads. We install standard, double, USB, outdoor weatherproof and dedicated high-load power points for kitchens, studies, garages, sheds and alfresco areas. Each outlet is wired to the correct circuit, tested and positioned neatly for everyday use. In Somerville, with more home offices, chargers, appliances and outdoor equipment, many local homes need power where people actually live and work now. Impulse Electrical is fully licensed — A Grade A53308 and REC 25266 — with $25M public liability and a Certificate of Electrical Safety supplied on every job.
We confirm which circuit has capacity, where the outlet will actually be used, and whether that circuit already has a safety switch. A new point on a tired, unprotected circuit is not an improvement. You leave with tested outlets and a COES. Call 0418 383 232.
In an older township house the limit is often the board and the circuit, not the wall. A kitchen, a study or a garage outlet needs a circuit that can carry it, and a spare way if it has to be its own circuit. In a shed, extra outlets on a bench are straightforward when the sub-board has capacity. A long run out to that shed is part of the plan. We do not assume the supply is three phase. Outdoor points are weatherproof fittings.
Inside the older houses, the job is usually more points where people now work: a desk, a bedside, a kitchen bench. On a hobby farm the same idea is a shed bench that no longer relies on a reel and a double adaptor, and a pump circuit that is its own circuit rather than sharing a light. If the circuit feeding any of these has no safety switch, that is fixed in the same visit.
Related reading: Power point installation across the Peninsula · Power point installation guide · Electrician Somerville
Also serving: Tyabb,Baxter,Hastings,Pearcedale
Often, if an existing circuit has spare capacity and is in sound condition. If the kitchen or the garage is already at its limit, we run a new circuit. We say which it is after looking at the board, not from the number of points you want.
Yes, when the sub-board has capacity. If the shed is only fed by a light circuit, we run a proper circuit or upgrade the submain. A long run across the block is measured, not guessed.
Only where the supply is already three phase. We check the meter and the board before promising it. If the supply is single phase, we say so, and we talk about what a single-phase circuit can actually feed.
They will if they are placed where the appliances are, on circuits that can carry them. Adding one more point on the far wall does not help a kitchen bench full of leads. We mark the positions with you before we cut.
