Home → Frankston → Power Point Installation
Power Point Installation in Frankston from Impulse Electrical Contractors, based nearby in Dromana and servicing the wider Mornington Peninsula. Around Frankston Beach, Bayside Centre and Karingal, coastal units, established brick homes, townhouses and commercial tenancies need electrical work that is safe, tidy and suited to local conditions.
Call 0418 383 232Frankston’s brick veneer homes were wired in the 1960s–90s for a very different household: one outlet behind the bed, two in the kitchen, none in the garage. Now the spare room is a home office, the kitchen runs a coffee machine, air fryer and induction cooktop, and the garage has a second fridge and a battery charger. Adding outlets where people actually use them — and on circuits with real capacity — is one of the most common jobs we do in Frankston.
Extra power points make homes safer and more practical by reducing the need for double adaptors and extension leads. We install standard, double, USB, outdoor weatherproof and dedicated high-load power points for kitchens, studies, garages, sheds and alfresco areas. Each outlet is wired to the correct circuit, tested and positioned neatly for everyday use. In Frankston, with more home offices, chargers, appliances and outdoor equipment, many local homes need power where people actually live and work now. Impulse Electrical is fully licensed — A Grade A53308 and REC 25266 — with $25M public liability and a Certificate of Electrical Safety supplied on every job.
We are in Frankston most weeks, so adding power points is a quick visit for us and a good moment to check the board and safety switch coverage while we are there. Every new outlet is on a correctly rated, RCD-protected circuit, tested and mounted neatly, with a COES issued on completion.
Kitchens need dedicated circuits for the bench appliances and the cooktop, not a string of outlets on one. Home offices need outlets at desk height. Bedrooms need USB-integrated outlets so phones are not charging on the floor. Garages need a dedicated circuit for the second fridge, tools and chargers. We add outlets where the load actually is, on circuits that can carry it, so the board is not being asked to do more than it can — and in a brick veneer we route cable through the cavity and roof space so the finish is preserved.
For rentals, adequate outlets remove the double adaptors and extension leads that cause faults and complaints; we can add them between tenancies alongside the safety check. In apartments we work within body corporate rules on wall penetrations. For shops and offices around the Bayside Centre and Nepean Highway we add outlets and dedicated circuits outside trading hours.
Related reading: Power point installation service · Signs a home needs rewiring · Electrician Frankston
Also serving: Seaford,Mount Eliza,Langwarrin,Carrum Downs
Often, yes — if the circuit has capacity and is protected by a safety switch. High-load appliances such as ovens, cooktops and workshop tools get their own dedicated circuit.
Yes. Any new or altered final subcircuit must be RCD-protected. If the board does not have one covering that circuit, we add it as part of the job.
Yes. We route cable through the wall cavity and roof space and only use surface-mounted conduit where the wall cannot be opened.
Yes. Power point installation is prescribed electrical work and a Certificate of Electrical Safety is issued for every job.
