Home → Tyabb → Switchboard Upgrades
Switchboard Upgrades in Tyabb from Impulse Electrical Contractors, based nearby in Dromana and servicing the wider Mornington Peninsula. Around the Tyabb aerodrome, the antique shops and the surrounding hobby farm belt, equestrian properties, hobby farms, heritage homesteads and aviation workshops need electrical work that is safe, tidy and suited to local conditions.
Call 0418 383 232Tyabb switchboards are often the original board in a heritage homestead or an older farmhouse, with stables, a machinery shed and a pump circuit already on it. Many of those boards are overdue for replacement, and the earthing was never brought up with the outbuildings. A hangar or workshop at the Tyabb aerodrome is a different board, and it is three-phase only if that supply already is. Impulse Electrical Contractors upgrades them from our Dromana base.
If your lights flicker, breakers trip or the board still has ceramic fuses, it is time to upgrade before adding more electrical load. We replace old fuse boxes with modern circuit breakers, safety switches and labelled circuits, then test the installation and provide a Certificate of Electrical Safety. This is especially important before installing EV chargers, air conditioning, induction cooking, workshop outlets or major renovations. In Tyabb, older homes and renovated properties often reach the limit of the original board quickly, so we check capacity, earthing and meter panel condition before recommending the right upgrade. Impulse Electrical is fully licensed — A Grade A53308 and REC 25266 — with $25M public liability and a Certificate of Electrical Safety supplied on every job.
We open the homestead board, the meter panel and the earthing before naming the work. A farmhouse is not assumed to match a stable block or an aerodrome workshop. You leave with labelled breakers, tested safety switches and a Certificate of Electrical Safety (COES). Call 0418 383 232.
On an older farmhouse the job is usually the whole enclosure. The fuse board comes out, safety switches go on power and lighting, and the new board has room for the house plus the circuits that already run to sheds. On a lifestyle block we trace the submains to stables and machinery sheds before we add another way. We do not add a breaker to a board that has no spare way, and we do not treat a hangar fit-out as the house next door.
The Tyabb page already says heritage homes and older farmhouses often need full switchboard replacements, earthing upgrades and safety switches after decades of wear. That is the homestead whose board still carries stables and a water pump. A workshop at the aerodrome is checked as that premises, and three-phase is used only where the supply already is three-phase. A village shop is not the farmhouse board.
Related reading: Switchboard upgrades across the Peninsula · When to upgrade a switchboard · Electrician Tyabb
Also serving: Hastings,Somerville,Pearcedale,Baxter
Yes. The Tyabb page says heritage homes and older farmhouses often need a full switchboard replacement and an earthing upgrade. We open the board that is there. A newer house on the same road is not treated as the same job.
Only if the board and the submain can take it. Lifestyle properties in Tyabb spread circuits across stables, sheds and pumps. We trace those runs before we add another circuit, and we replace the enclosure when there is no spare way.
The aerodrome page already covers hangars, workshops and aviation businesses, including workshop power and lighting. We inspect that premises on its own. Three-phase stays on a supply that is already three-phase.
The homestead board still needs spare capacity and sound earthing, and the upgrade comes first.
