A-Grade Licensed A53308  ·  REC 25266  ·  $25M Insured
Impulse Electrical Contractors

HomeFrankston → Switchboard Upgrades

Switchboard Upgrades in Frankston

Switchboard Upgrades in Frankston from Impulse Electrical Contractors, based nearby in Dromana and servicing the wider Mornington Peninsula. Around Frankston Beach, Bayside Centre and Karingal, coastal units, established brick homes, townhouses and commercial tenancies need electrical work that is safe, tidy and suited to local conditions.

Call 0418 383 232

Frankston has the widest spread of housing on the Peninsula, and its switchboards reflect it: 1960s–70s brick veneers around Karingal and the older streets off the Nepean Highway with original boards and no safety switches, 1980s–90s family homes with first-generation breaker boards now full, apartment blocks near the foreshore with small boards and shared metering, and a high proportion of rentals that must pass the two-yearly Victorian electrical safety check. Board upgrades are the single most common job we do in Frankston.

If your lights flicker, breakers trip or the board still has ceramic fuses, it is time to upgrade before adding more electrical load. We replace old fuse boxes with modern circuit breakers, safety switches and labelled circuits, then test the installation and provide a Certificate of Electrical Safety. This is especially important before installing EV chargers, air conditioning, induction cooking, workshop outlets or major renovations. In Frankston, older homes and renovated properties often reach the limit of the original board quickly, so we check capacity, earthing and meter panel condition before recommending the right upgrade. Impulse Electrical is fully licensed — A Grade A53308 and REC 25266 — with $25M public liability and a Certificate of Electrical Safety supplied on every job.

Frankston is at the northern end of our run from Dromana and we are there most weeks, so board inspections are easy to schedule. You get a modern, labelled board with safety switch protection on every circuit, tested and documented with a Certificate of Electrical Safety (COES) for your records, your insurer or your property manager.

Why choose Impulse Electrical in Frankston?

Brick veneers, renovations and boards that ran out of room

A typical Frankston brick veneer has been through a kitchen renovation, a split system or two, a heat pump dryer and maybe a home office since the board was fitted. Older boards respond with nuisance tripping; ceramic fuse boards respond with blown fuses and warm fuse holders. An upgrade replaces the fuse or breaker assembly with a modern enclosure, individual circuit breakers and RCD protection on every final subcircuit, with every circuit labelled and spare ways left for the EV charger or the next split system.

Rentals, apartments and small business

Frankston has a large rental market, and a board without safety switch protection will not pass the two-yearly electrical safety check; upgrading it is the usual way to bring an older rental up to standard and we work with property managers on access and timing. In apartments near the foreshore the board is small and the metering is shared, so the job needs body-corporate coordination and careful planning. For shops and cafés around the Bayside Centre and Nepean Highway strips we handle three-phase boards and schedule shutdowns outside trading hours.

Related reading: Switchboard upgrades across the Peninsula · When to upgrade your switchboard · Electrician Frankston

Get a Free Quote →

Also serving: Seaford,Mount Eliza,Langwarrin,Carrum Downs

Switchboard Upgrades in Frankston — FAQs

Is a switchboard upgrade required for a rental property in Frankston?

Not automatically, but Victorian rental providers must have an electrical safety check every two years, and a board without safety switch protection will not pass. Upgrading the board is the usual way to bring an older rental up to standard.

How do I know if my Frankston home still has an old board?

Open it. Ceramic fuse holders with fuse wire, or a board with no test button on any device, means no safety switch protection and a board that is due for an upgrade. Many 1960s–70s homes around Karingal still have these.

Can you upgrade the board in an apartment?

Yes, with the body corporate’s cooperation on access to shared metering. Apartment boards are small and need careful planning, which we do before quoting.

How long is the power off during an upgrade?

Usually part of one day while the old board is removed and the new one fitted and tested. We give you the expected window in advance so fridges and home offices can be planned around it.